Apple iPod Classic 160 7gen Case with UGreen Bluetooth Sender transmitter remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extensive remix on things I wanted from the original model.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing recommendations
2 wall give to the best structure and flexibility
.2 mm in height works well
20% infill
definitely supports are needed
Please check back with the original model of you wish to use their settings
Additional accessories
As it is not required 12 mm wide hook and loop cable strap to strap down the 90° 3.5 mm Jack.
And obviously all the other accessories for the original model still apply here.
Don't hold me to it as my primary iPod is the last generation iPod classic so all the modifications were in service of that iPod, but I do own all variations of the iPod classic line. At some point I will be adding all my changes to this model as well. Keep in mind it did take me 40+ hours to get this done. I could probably shave off 20 as it was a learning experience to get an STL to work with fusion 360s non-commercial software.