1 / 6
Sony BP-HP550-11 Battery Harness for rechargable AAA cells — zdjęcie 1
1 / 6

Sony BP-HP550-11 Battery Harness for rechargable AAA cells

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Battery harness designed to replace the original Sony BP-HP550-11 battery pack

Ocena
0 / 5
Polubienia
5
Pobrania
22
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Summary

This is a battery harness designed to replace the original Sony BP-HP550-11 battery pack, which typically costs around 25 €.

It allows replacement AAA rechargeable batteries to be charged using the original Sony MDR‑RF855RK base station or similar charging docks. You only need to provide two rechargeable AAA NiMH cells.

⚠ WARNING: Only use rechargeable AAA NiMH batteries. Using non-rechargeable batteries may lead to overheating or fire. The capacity of the rechargeable cells may be higher than that of the original pack.

Q&A

Q: Why not reuse the original harness?
A: The positive terminals on the original Sony cells are longer than standard AAA terminals, so regular batteries may not make proper contact.

Q: Why is the harness necessary at all?
A: The harness presses a small lever inside the battery compartment, allowing the device to recognize the battery pack and enable charging through the docking station. Without it, the device disables charging.

Q: Why can’t I use non-rechargeable batteries with this harness?
A: The charging base would treat them as rechargeable, attempt to charge them, and cause dangerous heat buildup. Always use NiMH rechargeables only.

Print Settings

  • Layer height: 0.4 mm (adequate quality).

  • Printed without supports or rafts.

  • Printing time: approximately 15 minutes.

Tagi