Parametric BLE Tracker Bike Mount - Almost Waterproof with TPU Seal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric Tracker Bike Mount with TPU seal that almost makes it waterproof (WARN: Useless TPU Seal) and tube fitting
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric Bike Mount for Retangular BLE Tracker.
A parametric fusion made mount for tracker or other small enclosure-needed things. It is almost waterproof since it's TPU seal don't cover the whole perimeter. It have a Fitting to place it on a bike tube. It was tested on a Segway F3 Pro and a Ugreen FineTrack G BLE Tracker
Fusion Configurable Parameters:
Tracker Lenght
Tracker Width
Tracker Height
Tracker Corner Radius
Tracker Fillet Radius
Case Chamfer Lenght
Zip Tie Width
Zip Tie Thickness
Case Base Thickness
Case Top Thickness
Case Wall Thicskness
Tube Screw Offset
Tube Screw Head Height
Tube Screw Head Diameter
Other Settings Not Recommended to Modify
Recommended to print with at least PETG. No supports nedded. print with the cut facing up
Printed with Elegoo RAPID PETG on a Elegoo Centauri Carbon
Warning:
A TPU gasket was created to improve sealing, but it does not work reliably. The mount was intended to be almost waterproof, but the gasket does not cover the full perimeter and it also prevents the case from closing properly. Using the TPU seal is not recommended.