Pegs for .mm size guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A useful complimentary tool to the awesome "Hole Guide 2-12mm" by D3D which includes corresponding pegs.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These pegs are a useful complimentary tool to the awesome "Hole Guide 2-12mm" by D3D. In the same way the hole guide provides you with designed vs actual size requirements based on real world "pegs", these pegs work in the opposite way, allowing you to better determine the correct design sized peg for real world holes. Both work in tandem, and we have developed this knowledge base article describing how to use them both!
can print without supports if you have bridges.
.2 mm layer height works best
walls outer first then inner is best
a brim can be helpful if you bed doesn't heat evenly but not required
They are designed to stack on-top of each other, 6 to each "holder" print.