Booster box wall mount w/ acrylic case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for a Pokémon booster box inside an acrylic case
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this wall mount for a Pokemon Booster box inside an acrylic case (specifically this one: https://www.etsy.com/listing/4354590876/pokemon-booster-box-8mm-premium-acrylic?ls=a&ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=booster+box+mtg&ref=sc_gallery-1-4&frs=1&plkey=EuvorlfSbJuJZk0fRKlpX7-bWg29%3ALT3bf4442fe1c564a3ce45f79d6785aa5658aeb493)
as I didn't see any wall mounts posted online. My ikea shelf filled up and the closest Ikea is 40 min away. I still wanted to show off my product, but didn't want to buy another shelf so I decided to make and print one.
2 files are included below. One for #6 screws and one for #8 screws.
Printed on an A1 mini in PLA (may need petg or ASA, but this is for a temp-controlled room)
0.16mm Optimal Setting (can probably get away with 0.20mm)
3 walls (cahnge to 4 if needed)
Gyroid infill 15%
seam position back
inner/outer/inner wall order
no support needed standing up but feel free to add them if needed