Rainwater Collector for 120 mm Downspout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D model is a rainwater diverter designed for collecting rainwater into a barrel.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
The inlet fits a 120 mm diameter rain gutter downspout. Inside the diverter, the internal geometry guides part of the flowing rainwater toward the side outlet, while the rest continues downward through the main pipe.
The side outlet connects to a 50 mm HT pipe, which can be used to direct water into a rain barrel or storage container.
The main downspout continues downward through a 110 mm HT pipe, allowing excess water to flow normally into the drainage system when the barrel is full or when rainfall is heavy.
I printed this model in PETG using a 0.8 mm nozzle and a 0.4 mm layer height. Support is required for the side pipe. I used tree supports.
