Hollow Knight Diorama
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A diorama featuring one of the best scenes from the game.
- Ocena
- 5 / 5
- Polubienia
- 481
- Pobrania
- 654
- Wydruki
- 0
- Wyświetlenia
- 6371
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a print best done with resin. I used various techniques to get the final result. The base is made of clay and have used various LEDs and hidden wires for the glowy parts.
If you want to do add the same LED Noodle, you need to get the NOODs 60cm warm white 12V LED. You need to get a 2mm thick metal rod and use the Hornet Needle Halfto glue to the sides. This way the whole needle can act as conductor for power and go into the head of The Hollow Knight.
From there you can drill a small hole in the back of the head and wire up the LED, routing the wires on the inside of the cloak.
The LEDs for the eyes and the NOODs are wired in parallel. Don't forget to pick a good resistor to limit the LEDs from shorting out!!!