1 / 1
FCX18 LC80 Shock Tower +1.5mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a shock tower for the FCX18 LC80 that is 1.5mm taller. It is half of a shock tower assembly.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Print 4x with the split side down and supports on. Attach to the frame rails, then install the frame rails and glue the 3d printed parts where they meet.
