1 / 8
Horse Piggy Bank
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed using a combination of AI, Fusion 360, and Blender
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
This was designed using a combination of AI, Fusion 360, and Blender. Just because AI was used doesn’t mean this is unprintable. Images are real photos of it having been printed by me on a Bambu Lab A1 Mini.
!!! Warning: Unfortunately, this model does require tree supports. A support needs to run from the opening on the bottom all the way up to support the area where the coin comes down. I don’t think you could get away with regular supports or no supports, since that spot specifically requires a tree support. Sorry. And just remember Make sure that there’s nothing you can’t easily pull out of the bottom hole. There should be just one major support running up inside. The rest of the interior, other than maybe the threads at the bottom, should not be supported.My daughter loves horses and really wanted a piggy bank, so I designed this as a simple horse piggy bank. The opening on the bottom is large enough that it shouldn’t be too hard to pull things out.