Tokina 135mm f/2.8 M42 to Sony E Adapter 3D Print – Mirrorless Lens Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable M42×1 to Sony E-mount adapter designed for the Tokina 135mm f/2.8.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D printable M42×1 to Sony E-mount adapter designed for the Tokina 135mm f/2.8.
This adapter allows you to use the Tokina 135mm lens on Sony E-mount cameras such as Sony a6000, a6300, a6400, and Sony A7 series.
The adapter has a 27 mm height, which was carefully tested to provide correct focusing across the full range — from portrait distances to infinity focus.
To improve stability, the bayonet interface is intentionally designed with a slightly tight fit, helping to reduce play between the adapter and the camera mount. This minimizes wobble and provides a more solid connection, which is especially useful for astrophotography and telephoto lenses.
Features
✔ Designed for Tokina 135mm f/2.8 M42
✔ 27 mm adapter height
✔ Full focus range verified (portrait distance → infinity)
✔ Tight Sony E-mount fit to reduce play
✔ Lightweight and easy to print
✔ Ideal for vintage lens adaptation and astrophotography
Tested with Sony a6000 and Tokina 135mm f/2.8 M42 lens.
