Anycubic 4max Pro (1.0) Raspberry Pi mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small brackets for an RPi in the 4max Pro's electronics bay
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Simple Raspberry Pi mount for the Anycubic 4max Pro 1.0, might also fit the 2.0. Kind of thrown together and not the world's sturdiest thing, but does the job just fine. Cable routing is left as an exercise to the reader, however
The Pi mounts to the brackets with short M2.5 screws, with the larger bracket (B) on the USB connector end. The brackets attach onto two screw posts next to the mainboard fan with M3 screws. The posts hold cable routing clips by default, and you can likely keep the clips under the Pi brackets if you wish
The mounts in the example photo are made of PETG, but most likely any material will work