Simple VESA Monitor Mount and Stand (Rotatable + Height Adjustable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, stable VESA monitor stand that’s rotatable, extendable, and height adjustable. Tested stable with up to a 32"
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple, stable VESA monitor stand that’s rotatable, extendable, and height adjustable. Tested stable with up to a 32" monitor.
Print info: easy print, ~330g total
Recommended: 0.28mm layer height, 3 walls, 20% infill
Parts included
Rotatable VESA mount: fits 75x75 and 100x100
Telescopic stand: adjust to your preferred height
Stable base: two sizes
270×220 mm
240×220 mm
Hardware needed
1× M6 screw (≥65mm) + nut
Connect VESA mount to telescopic stand (use the printed washer + nut knob)1× M5 screw (≥25mm) + nut
Connect base to telescopic stand7× M4 screws (≥14mm)
4× for monitor to VESA mount
3× to lock the telescopic height
Side note
Yes, I willingly spent an unreasonable amount of time, caffeine, and sanity making this. If it helps you, hit like. If it really helps you, coffee via Ko-fi is always appreciated. 😌☕
Thanks for coming to my TED Talk. 😌☕