14mm CCW airsoft mock supressor with baffles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an airsoft accessory only and made for 14mm CCW theads. Also includes baffles.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 173
- Wydruki
- 0
- Wyświetlenia
- 787
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer heights since higher messes up the threads, i haven't used smaller layers. You can optionally print the baffles in TPU for more integrity if a baffle strike occurs but you need a stiffer one like 95A. Main printing material is unspecefied, i used pc blend with success. Feel free to experiment! PLEASE POST MAKES!
Outer dimensions: 34x162mm
Inner dimensions: 30x140mm
I haven't done any real tests yet only basic firing. Beware that this is my first model here.