Customizable Pillar Set for Märklin H0 C-Track - higher pillars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
12 pillar set for Märklin H0 C track up to 100mm (about 4 inches)
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 319
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
12-16 pillar set for Märklin H0 C track up to 100mm (about 4 inches)
The amount of pillars depends on the maximum height.
Every height available as a ramp with all needed pillars and individually.
The original files are also available for download below.
Especially 100mm should be enough for a train to pass below, but please check for yourself. Trains with pantographs etc. might not fit. All pillars up to 78mm have been tested.
Use: Put one pillar in between each track segment (at the connection point). Make sure they are standing securely.
Have fun with your trains on the next level ;-)
Photo Attribution:Photos used in this listing are by wstein (original creator) and are used under the terms of the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.