Mini Fume extractor for Gridfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini fume extractor for gridfinity. Uses 80x80x25mm fan, activated carbon filter and USB-C trigger board
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 72
- Wydruki
- 2
- Wyświetlenia
- 465
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mini fume extractor for Gridfinity. Uses 80x80x25mm fan, activated carbon filter and USB-C trigger board
This is a very tight build and requires precise placement of the trigger board. By placing the trigger board right between the ledges of the fan (as seen on one of the renders above) and hot-glued in place, it should line up closely with one of the holes placed on the side. Having this trigger board will block one of the M4 screws, so the lid will have to be held on with just 3. Alternatively, you could design the trigger board to sit outside the case, but that somewhat defeats the purpose of having it fit in a Gridfinity layout.
Parts:
12v USB-C Power Delivery Trigger board: https://www.amazon.com/dp/B0DGFYX1BN
80x80x25 12v fan: https://www.amazon.com/dp/B082HHZMM6
Activated Carbon filter: https://www.amazon.com/dp/B07RNGMXYG
M4x30mm Screw + M4 threaded insert