Kingdom Death: Monster - Small Token Organizer Trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize your small (mostly round) tokens for your game of Kingdom Death.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is my compact organizer for the small tokens in Kingdom Death: Monster. Using magnets they stack and snap together very nicely and won't fall out unless dropped.
My goal was to have the tokens take as little space as possible.
MAGNETS - The trays (and cover) are designed with spaces for magnets to be inserted. They are 5mm diameter x 2mm high cylinder magnets. I'm using N52 magnets, which I believe are the strongest you can get.
I ended up having to glue the magnets as they will eventually pop out over time. I used Zap-A-Gap Medium CA+. I found that it does very little ghosting on the print. Just a tiny spot of glue works, I use a chopped off toothpick(so it isn't pointy) dipped in the glue to apply it.
PRINTING - What's shown in the pictures was printed on a Prusa XL in an enclosure using two toolheads, one with Prusament Galaxy black and the other with Prusament Marbled Grey. Print settings, 0.4mm nozzle, 0.2mm layer height.
Also note the pictures are a lot lighter because my phone auto adjusted exposure. In real life they are a much darker black.