IC-1, a case for PISA/Industrial motherboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple case to house your industrial motherboard.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I have a Kontron Coolmonster/s, it's a Pentium 266 MMX al-in-one motherboard that's perfect for DOS gaming has it has a soundblaster compatible audio card, but I didn't wanted to use an entire case for it, so it can fit on my desk.
How to build it
Every screw hole needs a brass heat inset, but make sure the holes on your motherboard match mine, otherwise you might end up shorting something.
there is contact holder to keep the motherboard in place, this will fit PISA motherboards but you will need to test on yours if is not a PISA.
PISA it's ISA! so if your SBC is PCI base this might not fit.
Provide cooling as needed!
I printed mine in PLA, it's plenty strong. mine has "Kontron coolmonster/s " embossed on the side, this model has not, so you can use it with any motherboard you want.
I used a 22 mm Rocker Switch as a power button
