Baja Rey Vertical Tire Carrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a vertical tire carrier for your baja rey. I print this on my CR-10 SE printer with tpu and petg.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Open Community License v1
For "body 15" which is the main big part i have printed this in TPU with a .6 nozzle and %15 infill on Gyroid infill. I have printed this with the little overhang being on the build plate and have that cut off or you can just leave it off if you like
For the 3 little parts "body 12" and "body 13" with body 13 being the middle and body 12 you have too print 2 out of for the outsides.
For both body 12 and 13 i have printed these out of petg with .4 nozzle and .2 layer height and 5 walls for outer with inner walls. I used gyroid infill with %40 on body 13 and %60 on body 12
This is a work in progress so feel free to comment and i will fix the problem
To assemble i will use self tapers right now to screw the bodies together with some JB weld holding them together. I use zipties to hold the tires in to the tire carrier