Desoldering pump and spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric desoldering pump and spool holder, can be printed separately if you don't need both.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This was my first model designed in OpenSCAD. It’s very simple, but it does the job nicely!
The project includes three parts:
Spool holder
Spool shaft
Desoldering pump holder
The model is fully parametric, so you can easily adapt the dimensions to your own tools. The main parameters are:
Outer shaft radius → matches the spool inner hole diameterArm span → matches the spool widthPanel width → matches the spool outer diameterDesoldering pump tip radiusDesoldering pump body radius
Add a bit of clearance to each parameter (around 1 mm is usually enough) – it doesn’t need to be a tight fit.
Designed in OpenSCAD. Source code: https://github.com/bluesyann/openscad_shapes