2x8 wine bottle rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i needed a piece of furniture to fill a small gap in my kitchen, this was an easy choice
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
I want to start this off by saying this was heavily inspired by SteveT's modular wine rack found here.
however there were a few things i didnt like and thought it would be easier to design something for my own use to fit the needs I had. Now, being a 30-something-year-old white man i massively overestimated my skills in 3d modelling, so this took me the better part of 4 hours to make, and it is heavily flawed, the main one being that the front and rear sections are single pieces at 820mm tall/long. This is for 2 reasons:
1) So you can cut it up to fit on the printer you have. I have a creality K2 Plus with a 350mm bed, so I cut it up into a 3,2,3 using the cut and dovetail feature in creality Print (although the same feature exists in prusaslicer, orcaslicer and Bambu Studio).
2) i dont know how to cut and create dovetails in Fusion360.
I'll upload the 3mf files for the frame, the pegs and the bottle pegs; all have the amount you need to print in the file names. however i'll also upload the 3mf/STL files for the cut-up pieces for the Creality K2 Plus in the 3,2,3 format for any other 300mm+ printer. The f3d will be uploaded too, but please be kind im not good at CAD, and I've likely made many, many errors in that.
enjoy