1 / 2
Sensory Cube Joystick Fidget — zdjęcie 1
1 / 2

Sensory Cube Joystick Fidget

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A print in place, support free fidget cube with sensory details along the sides, and a joystick fidget on the top

Ocena
4 / 5
Polubienia
23
Pobrania
92
Wydruki
1
Wyświetlenia
472
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update: Added a split version, with and without supports. Must be glued together with the core inside

Sensory Cube Joystick Fidget

Is a completely printed in place and support free fidget toy that is designed to have multiple sensory features combined together in a simple cube that is easily printed. It prints quickly and with no supports on a well calibrated printer, there are some parts that have large overhangs so keep that in mind before printing. This can also double as a calibration device for your printer that can be played with afterwards!

Printing instructions: Recommended settings have been included as a 3mf file, however if you wish to use the stl file I strongly recommend .2 layer height maximum, 3 walls, and at least 10% infill for strength of the smaller sections of the print.

I Also Strongly Recommend You Use A Brim On the bottom center!! The central support for the ball can shake loose during the print otherwise.

I hope you enjoy, let me know your thoughts in the comments and post your makes!

If you'd like to support my work you can leave me a tip over at https://ko-fi.com/merpos

Tagi