1U networking tray to go with Cisco 3560CX switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tray that spans the gap between 3560CX switch and edge of 1U rack shelf
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a bit of a specialized piece but you never know. I made this to work with a 1U shelf I had. I wanted something to span the gap between my Cisco WS-C3560CX-12PD-S switch and the other edge of the rack shelf. There are 3 spots for some RJ45 couplers that measure 24x48mm that I had on hand. On one side there is a screw hole for the Cisco switches rack ear mount. On the other side there is a recessed opening for a ¼-20 nut. Then you drill a hole in the right spot and use a ½" long ¼-20 bolt and washers to hold it down.
Video showing it off: