Modular kitchen cabinet lid holder (tupperware/IKEA etc)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize all the lids! Print as many sections as you need, and stack your lids (or other things).
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Similar to a lot of other models, so nothing unique going on. Just wanted to try to model it and play with fillets and chamfers. Made sure to add rounded corners horizontal to the plate and chamfers the other way, for printability.
Does what it was supposed to, but will probably update it after finding some usability issues the first couple of days, especially with the lids with clasps.
Prints without support.
The settings I used was 2 walls, 10% infill (for the bottom part).
I used a modifier to set infill to 0% for the raised parts - attached a 3mf file if you want to print 5 of them at once with those settings applied.
Step file also attached if you want to make edits.