Sliding 120mm pc fan mount for cabinet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to alow easy and swappable instalation of a standard 120mm fan into a cabinet or other enclosure
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
A mount to alow easy and swappable instalation of a standard 120mm fan into a cabinet or other enclosure
Used this to add some active cooling to my AV cabinet where the minipc for the TV is along with the amp for the speakers, gets prety tosty in there so this in combination with some foam air guides alows air to be drawn from the rear cable entry points and venting on the lower shelves through the computer, amp and any other stuff i decide to stick in there. Put holes in the back of the cabinet with a hole saw, brackets are seccured with the screws for the fans. There are also air guides below the fans on the outside of the cabinet between the wall and cabinet, reccomended to add something like this if you are using in a similar situation to prevent hot air from re circulating
I needed to install the fans after putting the cabinet back against the wall and wanted the ability to swap them out and make some changes to the wiring without having to move the cabinet
These could be used anywhere you have a similar situation
fans are powerd by 3v from a cheap aliexpress buck converter powered by usb power. 3v was the slowest i could get these fans reliably spinning.
No generative AI used