1 / 13
Cobra Throttle (VKB Gladiator NXT / EVO Throttle Lever Mod)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A larger grip and lever for the VKB Gladiator base throttle
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 478
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (15)Powiązane
I started with powerchimp's adapter, but it interfered with the omnithrottle adapter i was using at the time. So I shrunk it down, streamlined it, and added threads for mounting a grip. I also designed a few different grips to attach and cut down the mounting block.
I called it the Cobra based on the way it looks when printed.
Notes:
- Print the adapter on the flat side (as oriented). I've added one with and without the cobra name.
- Print the grip threaded bolt flat as oriented. Thread it into the grip and then hold it in place as you screw on the grip.
- The base is tapped to accept the base bolt. It's a tight fit but that means it won't come out during use.
- The long round grip is designed with an inset for self-adhesive rubber grip I bought on amazon as seen in the photos. https://www.amazon.com/dp/B0CM5PB8Q9
Category: Video Games