Pistol grip for Feinwerkbau Model 65
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pistol grip for airgun Mod65 from Feinwerkbau
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 142
- Wydruki
- 1
- Wyświetlenia
- 504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
Print standing and with supports. The adjustable handrest should be printed with gap pointed to bed to hide the support artifacts and to get a smooth surface towards the lower hand.
Here printed with 6walls and 65%+ infill.
The sliding slot for the adjustable handrest screw-nut needs to be grinded out a bit for fitment so the nut runs free when untightened. Can be done with a dremel. or i would sugest a smooth barrel-nut with a collar to have a really low profile.
Drilled out the holes with 4mm drillbit
Used m3/m4 hardware, matching the pistol frame.
Added a nob for easy adjustment.
You can buy these grips from me if you don't have a printer available. Just send me a PM.