1 / 4
Portapenne di Luffy - Organizer da Scrivania One Piece — zdjęcie 1
1 / 4

Portapenne di Luffy - Organizer da Scrivania One Piece

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

porta penne a tema one piece

Ocena
0 / 5
Polubienia
7
Pobrania
66
Wydruki
0
Wyświetlenia
170
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Portapenne da scrivania a tema One Piece con l'iconico Luffy, progettato per sorreggere perfettamente penne standard (come la Pilot G-2) o stilo da disegno. Unisce l'estetica di una statuina da esposizione alla funzionalità di un organizer.

Il modello è ricco di dettagli (viso, muscolatura, texture del cappello) ed è stato testato e ottimizzato per la stampa su Bambu Lab P1S.

💡 Consigli per la stampa: A causa degli sbalzi netti a 90° (braccia e mento), i supporti sono obbligatori. Ti consiglio di usare i supporti ad albero (Tree). 

Impostazioni di Stampa (Print Profile)

  • Ugello: 0.4 mm

  • Altezza Layer: 0.12 mm (consigliata per massimizzare la resa dei dettagli)

  • Pareti (Wall Loops): 3

  • Riempimento: 15% Gyroid

  • Supporti: Abilitati (Tree)

  • Top Z Distance: 0.20 mm (per un distacco pulito del PLA)

 

--------------------------------------------------------------------------------------------

 

One Piece-themed desktop pen holder featuring the iconic Luffy, designed to perfectly hold standard pens (like the Pilot G-2) or drawing styluses. It combines the aesthetics of a display figure with the functionality of an organizer.

The model is highly detailed (face, muscles, hat texture) and has been tested and optimized for printing on the Bambu Lab P1S.

💡 Printing tips: Due to the sharp 90° overhangs (arms and chin), supports are mandatory. I highly recommend using Tree supports.

Print Settings (Print Profile)

  • Nozzle: 0.4 mm

  • Layer Height: 0.12 mm (recommended to maximize details)

  • Wall Loops: 3

  • Infill: 15% Gyroid

  • Supports: Enabled (Tree)

  • Top Z Distance: 0.20 mm (for clean PLA removal)

Tagi