Kantrael pattern Lasgun - Cosplay prop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello, as my third model, I’m sharing an updated version of my Lasgun. The model is reinforced with three PVC pipes: 16mm, 20mm, and 25mm. I’ve divided the Lasgun into prints for small and large printers—the 256 is for small printers and the 420 is for large ones. Additionally, I’m including the full model in case you’d like to cut it yourself.
So, to build this prop, you’ll need to purchase:
PVC tube 16mm / 1m,
PVC tube 20mm / 1m,
PVC tube 25mm/ 1m,
(optional) 8x 35mm wood dowels
P.S. The hole tolerance are specific to my printer and tubes, so I’m including a fit test with the current positions marked. To be safe, I recommend printing it out and checking it. If it doesn’t fit, let me know and I’ll modify the model and send it to you.