Two-In-One 12 Sided Sensory Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This toy includes 12 different sides with different patterns for touching and for stamping into playdoh/Kinetic sand!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Summary:
I worked as hard as I could to make this toy possible with the little time I had.
I made a dodecahedron (12 sided shape) and added shapes and patterns to most sides.
I did the best i could with the limited time.
I have included a 3mf for just printing without tuning slicer settings to make it easier to use, there's also an STL file if you want to slice yourself and a STEP if you want to refine the design or make it better. The STL version is really large and I would recommend shrinking it for printing.
I would recommend using lightning infill for faster printing and enabling supports to make sure that it prints perfectly well.
I hope you like this design, write your thoughts in the comments, leave a make, a like, and don't forget to follow to help me out. Thanks :)