2" / 50 mm Shower Drain Filter aka Hair Catcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement 2 inch / 50mm shower floor drain filter that traps hair for an ACO trough drain.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Our ACO slotted shower floor drain has a catcher basket under the grate that catches hair, lint, and debris thereby keeping the drain pipes clean. Each time I empty the basket that came with the drain I worried what happens if it breaks? What if I don't want to clean it out and rather simply replace it?
I searched Amazon and the internet but could not find the exact replacement. So I designed this basket that fits our 2 inch / 50 mm drain pipe opening perfectly.
I printed mine out of PLA as it; a) is plenty strong enough, b) had PLA available, c) easy to print, and d) will take years to degrade if ever. Since the basket needs to be removal periodically to clean out the collected debris, I will notice any degradation well before it breaks down.
If you worry about PLA getting wet you can easily print with PETG or another water resistant filament.
NOTE: This print ABSOLUTELY requires Supports.
The "handles" on each side protrude below the model. The other end of the model is round. I used PETG as the Support interface material and the Supports came off easily and cleanly.
I include the Fusion 360 file in case you want to make modifications. I'm a beginner with Fusion so the design methodology is likely suboptimal. \_(ツ)_/