Laser Engraver Honeycomb Standoff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully-parametric standoff for laser engraving
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This fully parametric standoff will hold your work in your laser engraver providing a few millimeters of clearance from the honeycomb bed. There are several STL's with different pre-selected sizes. The shaft is oval-shaped, so should be inserted in the bed and then rotated 90 degrees to lock in place.
Should you have a non-standard bed and require different shaft or gap sizes, the included .F3D is paramaterized to suit whatever changes you need to make. Open the file in Autodesk Fusion and select the Fx icon from the SOLID toolbar to select your sizes as desired.
The STL's should print flat without supports.