Joey Electric Folding Bike Water Bottle Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Picked up these electric folding bikes for a good deal. Needed a water bottle mount so I made a simple one that can be…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Picked up these electric folding bikes for a good deal. Needed a water bottle mount so I made a simple one that can be easily detached for folding up and a universal bracket to mount it and other future accessories on it.
Should fit any frame that is circular and ~19mm in diameter.
Bike can be found here: https://www.ridescoozy.com/collections/all/products/joey
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20 - 50%
Notes:
The brackets were printed at 50% infill, support needed for bolt holes.rnThe water bottle mount was printed at 20% infill, supports from build platform up only.rnPrint with 2 perimeter shells for strength, 4 top and bottom layers.rnrnFor the brackets, you'll need minimum: rn2 m5 x 30 boltsrn2 m5 nutsrn2 m5 lock washersrnrnYou could do 4 if you want, 2 placed diagonally works fine though.rnrnThe cup slides into a T slot, so nothing special there.rnrnThis bracket is designed to hold pretty much anything, so could be a phone mount etc as long as you design the same T slot to lock in.
Category: Sport & Outdoors