Astronaut Moon Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Astronaut figure with moon box base, rotating head, screw‑fit visor and backpack.
- Ocena
- 5 / 5
- Polubienia
- 127
- Pobrania
- 315
- Wydruki
- 3
- Wyświetlenia
- 1928
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This astronaut model is designed for easy, support‑free printing and simple assembly. The body prints as one solid piece, including the hands and shoes — flip it upside down when slicing if you want those parts in a different filament color for a clean two‑tone finish.
The cratered moon base doubles as a storage box with a lid, giving the design both display appeal and practical use. The head attaches to the body with a pin, allowing it to rotate slightly in both directions for a bit of poseability. The visor and backpack are secured with screws, keeping everything firmly in place while still easy to assemble.
Recommended Print Settings:
Layer height: 0.2 mm
Infill: 5–10%
Supports: None needed
Material: PLA or PETG
Orientation: Print body upside down for color accents on hands/shoes
