Boox Go 7 Protective Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A protective case for the Boox Go 7 family of devices.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
There are two sets of 3d files:
Booxgo7case
With Cover
Base
Cover
How to print
Hard Shell - For a hard shell case I would suggest scaling the model by 1-2%, as it is a tight fit that may take the back off with it. I would use PETG, ASA, or another tough temperature resistant filament.
Soft Shell - TPU worked for me, and the model should not be scaled up.
The Cover - I would probably print this in a stiffer filament like the hard shell. There is not cutout for a magnet, but a simple negative in your slicer should work for whatever magnets you have. The cover should be connected to to base with a piece of fabric and glue.