1 / 2
Garden shed handle for Arrow steel garden shed
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Garden shed handle for Arrow steel garden shed. Fits sheds with a horizontal screw hole pattern.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
The handles on my old Arrow steel garden shed split and came off the shed. I designed these replacement handles based on the originals. I added some reinforcement.
Optimal print orientation is vertical, but requires brim and recommend supports.
Print settings:
- PETG
- Layer height 0.2mm
- Infill 10%
- Vertical perimeters: 4
- Top solid layers: 4
- Brim 5mm
- Snug supports, 0.25mm, support on build plate only
Note use of supports here is more to prevent the handle from detaching from plate. 45 degree angle should be fine without supports, otherwise.
Alternatively, orient the shed handles with the narrow back on the build plate, but this will not be as strong.