RCBS Chargemaster 1500 Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Hopper Cap for RCBS Chargemaster 1500 powder dispenser
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
09/13/2026...I just uploaded the correct file and deleted the other one. I had the unfinished file that didnt have bevels on the nubs on the inside of the cap
produced a replacement powder hopper cap for the RCBS Chargemaster 1500 dispenser as one of mine was cracked, and a used one I picked up locally was missing the cap. I designed the size to fit most without any fine tune fitment, but you still may have to sand on the 8 nubs inside the cap. Fitment was different on all three on my 1500 Chargemasters. The cap is also thicker than OEM
No supports needed when printed how STL is uploaded