1 / 4
New Support Experiment (Kale Supports or Fractal supports)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Working examples of these supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Open Community License v1
You will have to do the following once you've imported each part:
Split into Parts, not objects.
Add settings to the pieces as follows;
"Kale" gets 1 wall (Perimeter), no top or bottom layers and no infill.
"interface" gets 1 wall, no top or bottom but infill is 60% dense rectilinear (you can change this to manage your interface layer spacing).
The "Part" may have whatever settings you'd like. For the pentagon cap, I did no infill or top layer.