1 / 2
Revo ADXL (Fysetc) Mount for Dragonburner — zdjęcie 1
1 / 2

Revo ADXL (Fysetc) Mount for Dragonburner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Revo Dragonburner Fysetc ADXL mount.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Built-in toolhead board accelerometers suck, as they are positioned too far from the nozzle.

This aims to position the Fysetc portable input shaper rigidly and as close to the nozzle as possible.

You will need:

  1. Trim the PCB as pictured.

  2. x2 m3 heatset inserts and m3x6 bolts to mount the input shaper into the bracket.

  3. Have two heatset inserts in the back of the dragonburner cowling installed and m3x8 bolts to mount.

Tagi