1 / 9
Creality CR-10 SE | part fan | part cooling modular remix — zdjęcie 1
1 / 9

Creality CR-10 SE | part fan | part cooling modular remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modular CR-10 SE part cooling assembly remixed from oomaxoo7's original.

Ocena
5 / 5
Polubienia
13
Pobrania
33
Wydruki
3
Wyświetlenia
195
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Work in progress but is the result of testing different 360 degree part cooling lower ends. Compatible with oomaxoo7's originals, my remixed front end and a new original looking front end.  

Interchangeable lower ends removing the need to start from scratch or to keep reprinting the majority of the housing when testing ducts. All screw holes resized to M3 with no nuts required. 

4No. M3x8 (front face and modular ducts), 3 No. M3x6 (cowl to 3D printer), 2No M3x20 (to bolt the fans to the housing)

Tagi