1 / 1
-0.06mm and -0.12mm offsets for the ram on the vulture in case you have weird seal issues — zdjęcie 1

-0.06mm and -0.12mm offsets for the ram on the vulture in case you have weird seal issues

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

i used -0.06 to get less friction

Ocena
0 / 5
Polubienia
2
Pobrania
17
Wydruki
0
Wyświetlenia
239
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

parametric model added too ig, just in case u want some special tolerances 
i found my vultures orings to be super tight so they did get an amazing seal but the prime was real stiff