Alignment Adapter to Mount Virtuoso GTi 150P on Star Adventurer Tripod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simplifies mounting the 150P GoTo tabletop telescope on the Star Adventurer tripod.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 99
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple jig I designed to make it easier to set up the Sky-Watcher Virtuoso GTi / Heritage 150P GoTo tabletop telescope on a Star Adventurer tripod.
This ring slides directly onto the mounting plate of the tripod, and once it’s on, the scope's mount can be easily centered on the tripod's mounting bolt.
Suggested Print Settings:
Walls: 4 perimeters (to keep the leg clips rigid).
Infill: 25% Gyroid.
Material: PLA works fine, but PETG is a good alternative if you leave your gear in a hot garage.
Supports: None.
It’s a quick print that saves a lot of hassle during setup. I hope someone else finds it useful!