Sensory Fidget Disc Toy Customizable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customisable Sensory disc with squeeze/pop and fidget options
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
SENSORY DISC
Sensory Disc with possibility to customise different "fidgets" to discover geometries, movements and material roughens and harness.
Under files there are available 3mf projects ready for prusaslicer with all needed files to create a possible configuration.
More in detail info under Customization
NOTE: The sensory disc is customisable, after selecting your configuration it is recommended to use glue. Some configurations allow print in place where no glue is needed.
Customisation
Tee set consist of:
Housing
Pop or squeeze rings
Rotary Fidget
Housing
Here there are 2 options:
Rounded edges (Normal or with Textures): Needs pins to be assembled together.
SET_1:
2.Print in place(Normal or with Textures): Flat bottom, only gyroscope as rotary fidget and 1 pop ring possible
SET_2:
Pop/squeeze ring
These are similar but one is intended to be done with infill (squeeze ring) and another with overhang (pop ring.
If you want to try the pop ring, it is recommended to just add one ring, so they can be pushed through.
Check SET_4 (3MG file - Decide if you want Rattle or Gyroscope - see next chapter)
TPU elasticity can affect the squeeze/pop objects. There are some test files available to test the amount of infill and perimeters you need to achieve best results.
Rotary Fidget
Rattle made of TPU + PLA: there is a MMU and a non MMU version
Gyroscope
If you have any trouble do not hesitate to contact me.