Blue Parrot (Minecraft)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Swedish meatball colored bird
- Ocena
- 5 / 5
- Polubienia
- 294
- Pobrania
- 527
- Wydruki
- 4
- Wyświetlenia
- 4792
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey it's the blue bird from Minecraft! Very similar to the green one, but the eyes need printed a little differently. No superglue (🤮) needed!
You will need 4 colors to print this little guy:
- Blue
- Yellow
- Black
- Dark Gray
Nothing too difficult to print but a quick note about the eyes: each eye side consists of two identical halves. The upper part needs printed first in blue, and then color changed to black in the final layer (I ironed this layer to add some density). The lower part needs printed in just yellow. (If you see Eye A/B followed by “o2”, the o2 means slight tolerance added).
I would use supports for the Head, Tail, and wherever else you think needs it. Since this print is really tricky to balance, it might help to use lower infill & shell numbers for the Head and any details closer to the front, although I actually just used default values for everything.
Good Luck!