Shroob with Blaster (Mario & Luigi RPG Series)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So anyway, I started blasting
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 940
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey just another Shroob, but this one comes with a freakin laser! It's from Mario & Luigi: Partners in Time on the Nintendo DS.
You'll need 6-7 colors depending on what you choose for the blaster:
- Purple
- Light Blue
- Black
- White
- Red
- Gold
- Teal/Blue for the Blaster Emitter
No superglue needed (🤮🤮🤮). Printed with mostly PETG, but the blaster is made with silk PLA.
Printing
Some parts like the Cap and Arms need supports. Supports help with the Body, but they're not entirely necessary. For object orientations I've included all of my 3mfs to show how I printed this guy.
Assembly
Should be pretty straightforward. I didn't need any glue. I would be careful to make sure the claws fit in the arms. Since precision is a bit difficult with organic shapes, I have included a few blaster handles. One's with the higher number are slightly higher diameter (less loose).
Notes
If you have any other concerns, the other Shroob model page might help. I made this a new model entirely since, while there are a lot of common parts, there are also 10+ new parts.
CAUTION: claws are sharp so be careful if letting children play with this figure.