Biqu BX Screen mount 45> 40x40 extrusion.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 40x40 extrusion profile is intended to mount the Biqu BX screen at a 45 degree angle so the printhead+ 5010…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This 40x40 extrusion profile is intended to mount the Biqu BX screen at a 45 degree angle so the printhead+ 5010 cooling duct does not hit the power cable for the Pi when upgrading to linear rails.
For best results print it sideways with interior support. They are easy to remove afterwards.
I tried to print it upright with a base support but the overhang angle is to steep and likes to lift after 5 layers. You might have better luck like that. The example in the pictures is printed sideways.
I am working on a swivel type mount but for now Enjoy!
Print Settings
Printer:
Biqu BX
Rafts:
No
Supports:
Yes
Resolution:
400
Infill:
25
Filament:
Esun PLA+
Blue
Category: 3D Printer Parts