Rolleiflex viewfinder adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to fit Hasselblad or Kiev viewfinders to Rolleiflex TLR cameras.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I have tested the adapter with three variants of Hasselblad viewfinders and one example of a Kiev viewfinder. They are very similar, but the interfaces are not exactly the same. This adapter has sufficient clearance to work with any of those. You can also use a Hasselblad or Kiev waist level viewfinder should you wish to. After the viewfinder is installed in the adapter the assembly can be removed and replaced as one unit.
I recommend printing the adapter from a strong filament such as Nylon-CF, since you are going to be using the adapter to attach something moderately expensive to something quite expensive and a failure could be costly.
Three fasteners are required. Two for attaching the rear crosspiece and one modified fastener to engage the circular hole on the rear of the camera focus screen housing. The modified fastener retains the viewfinder, so take care with that one.