1 / 2
Paint Pot Opener For Paint By Number Paint Pots — zdjęcie 1
1 / 2

Paint Pot Opener For Paint By Number Paint Pots

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed to make those tiny paint pots that come with the paint by number sets easy to open. So this is my solution.

Ocena
5 / 5
Polubienia
3
Pobrania
26
Wydruki
0
Wyświetlenia
79
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I needed a easy way to open those tiny paint pots, and I couldn't find one on the web, so here is a opener (spanner) that makes it very easy. You may or may not need to cut one of the tabs on the lower paint pot for this to work. All the paint pots with my kits seem to open fine without cutting one tap off. This opener works great with my paint pot holder found here: https://www.printables.com/model/1610735-paint-by-number-paint-pot-holder

I used the fine HIGHDETAIL print setting (0.10mm) on my AnkerMake 5M printer, 220C for all layers, bed temp 65C all layers, 10 top and 10 bottom solid layers,  8 perimeter layers, ESun PLA+ filament, 20% fill with Gyroid fill pattern, 1000mm speed across the board for print speed settings. No Skirt no Brim, Top and Bottom Fill - Concentric. Approximate printing time with the above settings 20 minutes.  

Designed with TinkerCad.

Note: Design may change in the future.

Tagi