One piece double watch winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of OSSW/Winderoo and a couple other mods
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I started building the original OSSW winder, and printed enough parts to connect 3 of them. I also decided to go ahead with the Winderoo additions.
As I was working through the build I noticed some of the remix's that had upgraded to gears and added a motor mount. Once I switched to gears and put two together I thought, why could I not just make this a dual watch winder? So that's what I did.
This remix doesn't use any of the pully parts as I replaced the belt drives from the original model by mwood77 with gears from DoubleH. Since there are no longer pullys, the gears can all move in closer to the backplate. In order to do this I remixed the original low rise gear holder. I also cut the two 4mm rods to roughly 83mm in length,
I used the motor mount from OMPEd to help better hold the motor in place.