Wall Mounted Filament Swatch System - 60 Swatch Slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print each card in your filament color, write the details, and hang them in this clean 60 slot wall mounted holder.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Keep track of all your filament colors and materials with this minimalist swatch system. Print each card in the filament it represents, write the details with a permanent marker, and hang them on the wall for a clean and organized overview.
Includes:
Filament swatch card with writing field and hole if you want to use a different organization method.
60 slot wall mounted holder (170x160mm footprint).
Tolerance test file. Print this first to verify fitment!
Swatch Card Dimensions:
60 x 40 x 4mm
Hole diameter: 5mm
Print Settings - Card:
No supports
Any layer height
Print in the filament you want to display
Print Settings - Holder:
No supports required
0.20 mm layer height recommended
10-15% infill (Gyroid)
Print time approximately 10-11 hours
Note: Tolerance printed and verified.
Print the included test file at 45 degrees before printing the full holder to verify tolerances on your printer. Let me know if I can help with anything!