intake_v2_120 shroud part modified with M4 4.5mm flange holes (normal tolerances) versus the stock M3 3.2mm flange holes

This is the original “intake_v2_120” shroud part that is contained in the “120mm/140mm Desk Fan (Updated)” origin model, where only the V2 120mm “Intake” part of that original model has been modified (in Fusion, using the “Configuration Parameters” setting, and for that change see the first attached photo) with a single change in it, to now contain 4 x M4 4.5mm (which are normal M4 screw tolerances in that case) sized flange holes (to mount to fan) versus the stock smaller 4 x M3 3.2mm sized flange holes (the flange holes are the holes that mount to a fan). That is the only change that has been made versus the origin model. If you have other makes / prints to utilize the "intake_v2_120" part with, that already contain M4 4.5mm sized flange holes in them then this remixed screw holes size part would work well for you, without having to drill out the 4 holes larger or somehow figure out how to resize the holes in an app. I have included the modified .3mf, .stl, step, and the Autodesk Fusion native .f3z (which you can easily change the “Configuration Parameters” in further if needed, but only if using the paid license or the 30-day licensed trial version) files in this remix in the files section.

Note: In the origin model, for which this remix is based on, the “intake_v2_140" 140mm portion of that origin model does in fact contain the same 4.5mm sized flange holes, however the “intake_v2_120” 120mm portion of that origin model contains smaller 3.2mm sized flange holes for some reason, but only for that smaller 120mm fan size versus the other 140mm fan size in that origin model, that this remixed “intake_v2_120” 120mm model contains (that were modified in Fusion, using the “Configuration Parameters” setting, and then all of the files were exported in that app that are contained in this remix).